General Discussion

[C16MAN]

I purchased a 206-5756 kit, very nice. But can any one give me CAT part numbers for fuel fittings to fit the filter head. One fitting must a 90 degree angle and must accept an 1/2 inch hose that must push over the fitting. The other one can be a straight fitting and must also accept an 1/2 inch hose to push over.

Where can one find a CAT catalouge for fittings and etc

[Jevlar · Accepted solution]

You can take a 6K-3607 + 2M-9780 seal, this is an adapter from the STOR -10 thread in the filter assembly to the more common JIC -8 thread.

From that you should be able to source a suitable hose fitting easily.

[C16MAN]

Thanx! that worked perfectly!