Machine Operation & Maintenance

[jaypeeno]

hi everybody

I have got air in my 930G loader engine (3056E) and bleeding out the air has prooved to be very difficult. I tried bleeding from the filters and injector inlet lines but each time i try there is always some air in the system. any tips on how to fully bleed the sysytem will be highly appreciated.

                   thanks.

[zaidi_drmechy · Accepted solution]

Hi there,

If  still got air inside the fuel systems, why not u try bleeding at the fuel pump. U can see, one small plug attach at the fuel pump. From there u can purge the air but make sure the starting key switch must be on.

tq

[jaypeeno]

thanks a million I tried from pump and initially it didn't work then I open the pump and discoverved  on of the valves wer bad. Changed the pump and the machine is workinh like new. thanks once again