Power Generation: Site Design, Installation, and Connection

[longkin]

Hi all,

I have synchronise 02 CAT generators that use ADEM4 for injection pump. Any one have a diagram of this ECM? Please send me if you have or advise me if you know how to control speed with this ECM.

Thanks!!!

Longkin

P.S: my email: hatech-co@viettel.vn

[mikel]

You'll need to provide more details, best is to provide the serial numbers of the units you have, the kW, voltage ratings and what kind of control panel it has mounted. The dealer you bought it from should be able to provide this info.

Mike L.

[wtc2008]

longkin,

if it is ADEM4 (like C15)gensets, using 9X9591 for speed adjustment.

9X9591 is used to convert analogue signal(0-5V DC) to PWM signal.

The speed signal is connected to 66 pin in ECM from PWM.

Additional, use ET to set the "desired speed input"  as PWM input.

Regards,

wtc2008

[tuyenpham]

Dear longkin. Are you from Vietnam? If you are, I can help you. I'm working for PhuThaiCAT.

[edmundo]

hai bro....if you want to control speed you can use PWM converter and load sharing PWM output my suggest you can use Load sharing PWM output and make easy for sincron