Power Generation: Site Design, Installation, and Connection

[Mabry]

I have a year 2002 model 3406 engine with SR4B generator and I want to connect a remote start.  The drawing shows wire 30 and 57 as as my connections however I can't find 57 any body have an idea were it is?

[mikel]

A handfull of different designs in those days, in reality, the IC contact is across battery negative and the START input from the ECS to the EMCP II, just take a look at your print and you'll be able to figure out where the customer connection is.

Mike L.

[wtc2008]

Mabry,

According to drawing, wire 30 and 57 are used as Remote Start signal.

Wire 30 is conected to battery negative(-). Wire 2 is also conected to battery negative. it is easy to find the wire.

WIre 57 is connected to Chassis Customer Terminal 12, connected to Door terminal 7 , to GSC port 33 through 40 way harness conector linked to GSC.

You can find the wire from GSC, then to terminal.

Regards,

wc2008